| |
|
| Operators - PV |
For potentially explosive atmospheres
Encapsulated
II 2 G Ex mb II T6..T3, II 2 D Ex mD 21 IP67
Moulded enclosure with integrated cable
• Explosionsproof operator intended for use in potentially explosive atmospheres according to ATEX Directive 94/9/EC
EC type-examination certificate no. : BAS 98 ATEX 2168 X
IECEx Certificate of Conformity no. : IECEx SIR 06.109X
• Compliance with the Essential Health and Safety Requirements has been assured by compliance with the International and European Standards EN-IEC 60079-0,
EN-IEC 60079-18, EN-IEC 61241-0 and EN-IEC 61241-18
• Easy electrical installation with moulded-in supply cable, 2 m long
• Ingress protection degree IP65
• The operators are designed for installation on a wide range of valves |
Data Sheet PV pdf
|
|
|
|
|
| Operators - NF WSNF |
For potentially explosive atmospheres
flameproof enclosure
II 2 G Ex d IIC T6..T4, II 2D Ex tD A21 IP67
Aluminium, stainless steel enclosure
• Explosionproof operator for use in potentially explosive atmospheres according to Directive ATEX 94/9/EC EC type examination certificate no.: LCIE 00 ATEX 6008 X IECEx Certificate of Conformity no.: IECEx LCI 07.0015X
• Compliance with the Essential Health and Safety Requirements has been assured by compliance with the International and European Standards EN-IEC 60079-0, EN-IEC 60079-1, EN-IEC 61241-0 and EN-IEC 61241-1
• Easy electrical installation by means of a screw terminal coil
• Enclosure provided with a 1/2 NPT threaded entry hole (M20 x 1,5 in option) for a broad range of cable entries
• Ingress protection degree IP67
• A wide range of valves can be supplied with the operator |
Data Sheet NF WSNF pdf
|
|
|
|
|
| Operators - NA NB |
For potentially explosive atmospheres
flameproof enclosure
II 2 G Ex d IIC T6 .. T3, II 2D Ex tD A21 IP66
Stainless steel or cast iron enclosure.
• Explosionproof operator for use in potentially explosive atmospheres according to ATEX-Directive 94/9/EC EC type-examination certificate no.: BAS 02 ATEX 2157
• Compliance with the Essential Health and Safety Requirements of the ATEX Directive has been assured by compliance with European Standards EN 60079-0, EN 60079-1, EN 61241-0 and EN 61241-1
• Easy electrical installation by means of a screw terminal coil
• Enclosure provided with a M20 x 1,5 (optionally 1/2 NPT) threaded entry hole for a broad range of cable entries
• Ingress protection degree IP66
• A wide range of valves can be supplied with the operator |
Data Sheet NA NB pdf
|
|
|
|
|
| Operators - EF EV |
For explosive atmospheres
2 and 3 way encapsulated moulded coils with leads
• The solenoid is conforming to ICS-6 ANSI / NEMA standard and UL standards 429, 508 and 1002
• A one-piece moulded epoxy coated solenoid with an integral 1/2" NPT conduit hub and built-in strain relief for leads
• The epoxy encapsulation serves as the enclosure and the magnetic frame is moulded into the coil
• The operator is available as both pull or push type solenoid and can be installed on normally open and normally closed valves
• The solenoid has 35 cm long leaded wires
• The solenoids include an internal non-resetable thermal fuse to limit solenoid temperature in the event that extraordinary conditions occur, which could cause excessive temperatures |
Data Sheet EF EV pdf
|
|
|
|
|
| Operators - EM WSEM |
For potentially explosive atmospheres
Increased safety/encapsulation
II 2 G Ex emb II T6..T3, II 2 D Ex tD A21 IP67
Steel or stainless steel enclosure.
• Explosions proof operator intended for use in potentially explosive atmospheres according to ATEX Directive 94/9/E, EC type-examination certificate no. : KEMA 98 ATEX 2542
• Compliance with the Essential Health and Safety Requirements has been assured by compliance with European Standards EN 60079-0, EN 60079-7, EN 60079-18, EN 61241-0 and EN 61241-1
• Easy electrical installation with screw terminal coil
• Peak voltage suppression standard for DC executions
• Enclosure provided with integral strain relief for cable with an o.d. of 7 to 12 mm
• Ingress protection degree IP67
• The operators are designed for installation on a wide range of valves |
Data Sheet EM WSEM pdf
|
|
|
|
|
| Operators - WPZN WSZN |
For potentially explosive atmospheres
Non-sparking protection, II 3 G/D EEx nA II T4 to T3 IP65
Moulded coil types with connectors.
• Operators intended for use in potentially explosive atmospheres according to ATEX-Directive 94/9/EC EC type examination certificate no.: Baseefa 03 ATEX 0649 X
• Compliance with the Essential Health and Safety Requirements has been assured by European Standards EN 50014, EN 50021 and EN 50281-1-1
• The assembly consisting of the coil and connector has IP65 protection
• Easy electrical installation by means of spade plug connector
• The operator is available as both a push or pull type solenoid and can be supplied on a wide range of valves. |
Data Sheet WPZN WSZN pdf
|
|
|
|
|
| Operators - ISSC WPIS WSIS |
For potentially explosive atmospheres
Intrinsically safe, II 1 G/2 D EEx ia IIC T6 IP65
Fully moulded enclosure.
• Explosionproof operator for use in potentially explosive atmospheres according to ATEX-Directive 94/9/EC N° EC type examination certificate: KEMA 98 ATEX 2544
• Compliance with the Essential Health and Safety Requirements has been assured by European Standards EN 50014, EN 50020, EN 50281-1-1 and EN 50284
• This highly efficient solenoid operates at very low power level (0.4W)
• The continous duty class F polypropylene moulded spade plug connector coil contains moulded in solid state components for switch-off peak voltage suppression, independent polarity connection and electronic enhancement
• Ingress protection degree IP65
• A wide range of ASCO/JOUCOMATIC valves can be supplied with the operator |
Data Sheet ISSC WPIS WS1S pdf
|
|
|
|
|
